1965 Mustang Convertible Body Shells – All New and Ford Approved

When the first Mustang body shells came out for the ’67 fastback, a lot of restorers were doing high fives since finding good originals was getting pretty tough. Now, Ford has announced the availability of all new 1965 Mustang convertible body shells which can be completed as ’64½, ’65 or ’66 models, depending on the trim and powertrain that is installed during the rebuild. I can see smiles all around.

The new bodies are stronger than the originals with higher grade steel and extra reinforcement where engineers have found the originals a bit weak. Combined with modern welding, these replacements are better than the originals and a perfect way to begin that Mustang project.

If you have an old Mustang with a body beyond repair, you can transfer the original parts to a whole new shell and if those parts themselves are in need of a complete rebuild, you can purchase brand new Ford approved restoration parts and build a Mustang as new as you like, almost everything you’ll need is available except for some minor body hardware.

Dynacorn International makes these shells, the same company that produces shells for the ’67-’68 fastback and the ’69-’70 fastback.

The ’65 body is in production now and can be delivered by freight truck to any address. The ’65 Mustang body includes the doors and trunk lid and all the sheet metal from the radiator support to the taillight panel except the hood and front fenders. Those items are available separately. The ’65 Mustang body shell starts at $15,000.

Definitely a nice addition to the Mustang stable and I imagine we’ll be seeing the results on the road before long.

Ford press release follows:

DEARBORN, Mich., Oct. 28, 2011 – It’s a classic car lover’s dream come true: Now it is possible to build a ’64½, ’65 or ’66 Mustang convertible from the wheels up using the all-new Ford-approved and officially licensed body shell.

The body shell for the original Mustang convertible, now in production and available for restorers as a Ford-licensed restoration part, gives classic car enthusiasts a new option in putting their classic dream Mustang ragtop back on the road.

“The 1964-66 Mustang is the most restored vintage vehicle. But the number of original 1964-66 vintage bodies is shrinking every year,” said Dennis Mondrach, Ford Restoration Parts licensing manager. “Most of the original Mustangs left in scrapyards are rusted or wrecked beyond repair. The new body shell is made of virgin metal and uses modern welding techniques. It comes rustproofed, and after final adjustment and finish preparation of the body panels, it is ready for painting and final assembly.”

To build a restored Mustang using the new shell, the powertrain, suspension and brakes, the electrical systems, the interior and trim can either be bought new or transferred from an existing car to the new body. Original parts that can’t be reused from an old Mustang can be replaced with Ford-approved restoration parts. Mondrach says that nearly all the parts needed to build a complete new 1964-66 Mustang convertible, except for some minor body hardware, are now available from Ford-approved classic parts suppliers.

Ford-approved Mustang restoration parts can be found at www.fordrestorationparts.com.

For a restoration part to be approved by Ford, suppliers must meet or exceed the fit, finish and quality of the original, said Mondrach. In order to keep classic Ford-built vehicles on the road, Ford allows parts suppliers access to original technical drawings, blueprints and specifications for parts.

The new body shell not only can save restorers time and money, but enable them to build a strong, well-engineered classic.

“Instead of spending money fixing rust and welding in new panels, restorers can now simply transfer their powertrain, interior and trim parts onto the new body shell,” said Mondrach.

The ’65 Mustang body shell is constructed of higher-grade steel than the original, said Jim Christina, vice president of Dynacorn International, the Ford-approved company that is manufacturing the ’65 Mustang. “We use a modern universal automotive-grade steel that is actually stronger than the original, and modern welding techniques along with more welds to strengthen the body,” Christina said.

The ’65 body is in production now and can be delivered by freight truck to any address. The ’65 Mustang body includes the doors and trunk lid and all the sheet metal from the radiator support to the taillight panel except the hood and front fenders. Those items are available separately. The ’65 Mustang body shell starts at $15,000.

America’s love affair with the original Mustang is still going strong after nearly 50 years. Debuting in April 1964, the original Mustang sold more than 1.2 million units – including more than 174,000 convertibles – before its first redesign in 1967. The 1964-66 Mustang has long been America’s most popular classic car of the postwar era. It is frequently the No. 1 most insured car at Hagerty Insurance, the world’s No. 1 insurer of classic and collectible cars.

The new body shell can be made into a 1964½, 1965 or 1966 Mustang, based on the powertrains and trim parts added to it. It is the third classic Mustang body shell now available to restorers. The other two are the 1967-68 and the 1969-70 fastback bodies.

Ford will display a new 1965 Mustang body shell Tuesday through Thursday at the Specialty Equipment Market Association (SEMA) show in Las Vegas. It will be parked next to a restored 1965 convertible to demonstrate the high quality of the assembly.